CAN/ULC-S PERIODIC INSPECTIONS AND TEST – DAILY AND MONTHLY. NOTE: Refer to Appendix D for examples of Inspection and Test Record. SCOPE. This Standard provides requirements for the inspection and testing of fire alarm systems and specifies the devices and functions to be inspected. 1 SCOPE This Standard prescribes requirements for the inspection and testing of fire alarm systems and specifies the devices and functions.
|Country:||Antigua & Barbuda|
|Published (Last):||16 June 2009|
|PDF File Size:||10.68 Mb|
|ePub File Size:||16.5 Mb|
|Price:||Free* [*Free Regsitration Required]|
Interior of dry-pipepre-action, deluge valves internal inspection? Low temperature supervisory device tested. Pressure control valve passed test?
CAN/ULC-S | Standards Council of Canada – Conseil canadien des normes
Is cah AC disconnecting switch installed? X Coded signal sequences are not interrupted by subsequent alarms. Ensure that the fire alarm system is fully functional? Hand wheel is not broken or missing? V Visual indicator test lamp test operates. In some municipalities e. Smoke particles obscure the receiver, and the unit goes into alarm.
H Operation of voice paging does not interfere with initial inhibit time of alert I signal and alarm signal. Special Inspection Postal Code: Output circuit designations correctly identified in relation to connected field devices.
CAN/ULC-S536-04 Fire Alarm Annual Inspection Test Form
Individual alarm and supervisory input zone clearly indicated and separately designated. Standpipe Hydrostatic and Flow Test Results to be completed every five years Date of last hydro-test: System is returned to service after an extended period of non-service? For reduced voltage or reduced current starting, record time cxn is on first step: Alarm device, s53 on dry pipe, uulc or deluge system using bypass?
J Correct electrolyte level. Operation of each individual alarm and supervisory zone indication gives the identical indication, or lights the identical indicators at the other annunciator s and sequential display s.
Most house fires start in the electrical wiring so it’s a good idea to have a battery operated smoke alarm installed as a “back-up”. Please review additional Article 9 testing requirements on the Passive Systems page.
If the sensor is part of an actual fire alarm system, make sure you alert other tenants in the building as to what you’re doing as well as your monitoring station if applicable. Diesel Natural Gas Other: Plug-in cables securely in place.
Fuel levels and a low fuel trouble indication the low fuel alarm set point should be checked to ensure the unit is able to deliver emergency power for the duration required by the Building Code for the type of occupancy; In-suite signals if equipped with a ccan feature must be checked for proper operation of the silence function including resounding if signals are silenced and a second alarm zone is activated ; Duct mounted smoke detectors must be individually tested and some rather detailed results recorded namely the differential pressure and the sensitivity reading on the Individual Device Test Record ; Stand-alone capabilities of networked systems must be tested and properly documented; Sprinkler system interconnection isolation valve supervisory signals, flow switch alarm, tamper, low temperature, heat trace controller trouble and supervisory, low air, etc.
Control valves opened until spring or torsion is felt in the rod?
Standards Council of Canada
These are the units that provide an interconnection to conventionally wired devices like manual pull stations, sprinkler isolation valves, flow switches, low air and the like; If your system employs a UDACT communicator, the technician must ensure that appropriate signals generated by the system during the testing must be received at the monitoring station; Field addressable relay modules must be listed on the Individual Device Test Recordand their locations and function documented.
Audible trouble signal operates. Will racks swing out of the cabinet at least ninety 90 degrees? Description Type Model No.
CAN/ULC-S Fire Alarm Annual Inspection Test Form
Standard sprinklers less than 50 yrs old. Monthly Inspection and Tests A Pilot lights are functioning? Magnetic door holder release activated by fire alarm system? Maintenance Items Annually Hose nozzles – open and close and lubricate if necessary. Cap gaskets in place and in good condition?