P4MM4 – read user manual online or download in PDF format. Pages in total: Biostar | P4MM4 | Owner’s Manual | Biostar P4MM4 Owner’s Manual The content of this user’s manual is subject to be changed without notice and we . P4MM4 VIA P4M gaming motherboard features-Socket ;Supports Intel Pentium 4/Celeron D/Celeron Processor;Supports FSB /MHz;Support.
|Published (Last):||7 September 2012|
|PDF File Size:||5.35 Mb|
|ePub File Size:||18.22 Mb|
|Price:||Free* [*Free Regsitration Required]|
When the Power Supply is eventually turned on 3. All the CMOS data will be loaded as defaults setting. This completes the installation. Enabled default Optional ROM is enabled. The CPU will fit only in the correct orientation. IRQ Resources This submenu will allow you to assign each system interrupt a type, depending on the type of device using the interrupt.
On defaultoff. All hard disks are capable of breaking down at any time.
While AC is not supplying power, the motherboard uses the motherboard battery 3V. It will disable the output on back panel audio connectors. Unless you have the above situation, you should disable this option.
The vendor makes no representations or warranties with respect to the. When connecting with wires onto connectors, please note that the red wire is the positive and should be connected to pin 2, and the black wire is Ground and should be connected to GND.
If install and FDC or the system has no floppy drive, select Disabled in this field. In boistar panel, you can get model name and detail information in hints of all the chipset that are related to overclocking.
Biostar P4MM4 | P4MM4 user’s manual – Page 5
With the Overclock Manager, users can easily adjust the frequency they prefer or they can get the best CPU performance with just one click. When you see the following dialog in setup procedure, it means setup is completed. Active to CMD Trcd Use this item to specify the delay from bioztar activation of a bank to the time that a read or write command is accepted. P4MM4 Solution Make sure power cable is securely plugged in. Re-install applications and data using backup disks. If the testing fail, system will do a fail-safe rebooting.
Page 31 P4MM4 Note: Maximum memory size is up to 2GB. Enabled defaultDisabled.
Each category includes no, one or more than one setup items. With a user-friendly Status Animation, it can represent 3 overclock percentage stages: This connector supports the provided floppy drive ribbon cables. The cool Hardware Monitor smartly indicates the temperatures, voltage and CPU fan speed as well as the chipset information.
Call the drive manufacturers for compatibility with other drives. System only boots from optical drive. TM2 Bus VID This option represents the voltage of the throttled performance manusl that will be initiated when the biostwr goes from not hot to hot.
If the system shutdown automatically after power on system for seconds, that means the CPU protection function has been activated. By Auto defaultMode 1. The BIOS provides critical low-level support for standard devices such as disk drives and serial and parallel ports.
It should also support the wake-up on LAN jump. Enter text from picture: In Auto mode, the system automatically determines the best mode for each device. System does not boot from hard disk 1. Plug in the power cord and boot up the system.
Biostar P4M80-M4 Owner’s Manual
Pull the lever sideways away from the socket and then raise the lever up to a degree angle. We strongly recommend you verify every speed you overclock by click the Verify button. Disabled Optional ROM is p4n80-m4. In this panel, you can decide to increase CPU biostaar voltage and Memory voltage or not. Thermal Monitor 1 defaultThermal Monitor 2.
This connector supports the provided floppy drive ribbon cables. Enabled Enables the function. This equipment has been tested and found to comply with the limits of a Class.
Biostar P4MM4 Manual
Voltage Panel Click the Voltage button in Main Panel, the button will be highlighted and the Voltage Panel will slide out to up as the following figure. DA default This action will boot-up the system according to FSB of the processor.
Bank Interleave This item allows you to enable or disable the bank interleave feature. The user information of peripherals that need to use this area of system memory usually2 discussed their memory requirements. When not disabled, each of the ranges is from 1 min.
This chipset manage bus speeds and access to system memory resources, such as DRAM.